How
to Install VAB/RIDE? |
|
1.System
Requirements |
1.A
personal computer with Intel 80386 processor (or higher) with
8 megabytes (MB) or more of memory |
2.Microsoft
Windows 95, Windows 98, Windows 2000, or Windows NT |
3.A CD-ROM
derive |
|
2.To
install VAB/RIDE
|
1.放VAB/RIDE進入光碟機中,本光碟將自動執行 |
2.If
the Autorun feature has been disabled, use the Browse option
to select the VAB Setup.exe program from the VAB CD-ROM Disk1
folder. |
|
3.
Authorization |
1.
第一次執行VAB/RIDE時將出現圖(1)訊息,此時必須由線上註冊取得授權碼(Authorization
Code)。
|
2.
可以直接點選「Authorize
via WEB」(紅色框框所示),進行網站註冊。
|
3.
進入Hyperception網站後,將出現圖(2)的內容,請務必填妥各項資料。
|
圖(1)
|
圖(2)
|
4.
填妥各項資料後,即可進行註冊,而得到一組授權碼(Authorization
Code)。
|
5. 將此授權碼填入圖(1)的Authorization
Code欄位中即可完成註冊。 |
|
4.
Unathorization |
1.
可在VAB/RIDE的Menu上,點選「Help」,開啟Unauthorize
VAB/RIDE。如圖(3)所示。按照步驟並經由「UnAuthorize
via Web」進行解授權如圖(4)所示。
|
|
|
圖(3) |
圖(4) |
|
2.此時連接到Hyperception網站,將出現圖(5)的訊息,按下按鈕即可完成解授權。
|
|
|
|
圖(5) |
圖(6) |
5.Caution |
1.
一套VAB/RIDE同時只能擁有一組授權碼(Authorization
Code),如第二台PC要使用時必需先將第一台PC做解授權動作。
|
2..
如果已經解授權完畢,要再次授權時,出現不讓我授權的畫面時該如何處理?此時表示您解授權的動作不完整,在開啟授權的畫面中,將底下「Last
unauthorization code」圖(6)所示,複製到圖(5)框框內,或連結到
http://www.hypersignal.com/Support/unauthorize.htm
輸入解授權碼。
|
3.
Warning:如要刪除整套軟體或硬碟要做格式化時,請務必將「Last
unauthorization code」備份請來,以免解授權不完整造成後來無法授權。
|
|
6
6.Tech support
|