C5402 DSP Starter Kit
TMDS320005402
| Tool Type |
Evaluation Bundles / DSP Starter
Kits |
| Current Version |
v2.0 |
| Host |
PC (Parallel Port) |
| Operating System |
Win98/2000/NT |
| Supplier |
Texas Instruments |
The TMS320C5402 DSK is in volume production
and available today for US $295. The TMS320C5402 DSK is a
low-cost, comprehensive development tool that allows new DSP
designers to explore the TMS320C5000(tm) DSP architecture and
begin developing C5000-based applications today. The C5402 DSK
is designed specially for digital communications applications
and comes complete with a TMS320C5402-based target board, DSK-specific
Code Composer Studio V2.0 Debug Tools, 32K application size
limited C compiler/assembler/linker, parallel port interface,
power supply and cables.
Ordering Information: Part Number TMDS320005402
includes a standard US power cord. Part Number TMDS32005402E
version includes both UK & European power cords
|
 The
TMS320C5402 DSP Starter Kit includes a C5402-based target
hardware module and CCS-v2.00 based DSK specific software. |
Hardware
Included
The new C5402 DSK gives students and new DSP designers
access to the industry's most powerful DSP specifically
optimized for applications that need the best combination of
power/performance/area. The 100 MIPS processing power of C5402
enables it to be used in a variety of signal processing
development areas including speech compression/decompression
speech recognition, text-to-speech, fax/data conversion,
modem, protocol conversion, tone generation/detection and echo
cancellation. The C5402 device features:
- 100 Mhz
- 40-bit ALU
- 16K x 16 Bit dual access on chip RAM
- 4K x 16 Bit on chip ROM
- Advanced multibus architecture with 3 separate 16-bit
Data memory busses and 1 Program Memory Bus
- 2 McBSP, 6 DMA controllers, 8 bit host port interface, 2
16 bit timers
- Ordering Information: TMDS320005402 includes a standard
US power cord, TMDS32005402E version includes both UK
& European power cords
DSK on board features:
- Embedded JTAG Emulation via the TBC and IEEE-1284
Parallel Port
- An on-board parallel port controller allows the host PC
to use the parallel port for emulation or to directly
access the host port interface of the 'C5402
- Two 3.5mm Audio Jacks for handset microphone and speaker
- RJ-11 Modular Interface Connector for DAA access
- DB-9F RS232 serial I/O port
- Expansion Port Connectors (future plug-in Modules)
- On board Standard JTAG interface connection for optional
emulation
- Expansion connectors for add-on accessories
- +5V Universal Power supply
Software Included
C5000 C compiler/Assembler/Linker:
The DSK is bundled with a special 32K (object size -
initialized data & program) code generation toolset. This
capacity limited version of our code genation tools allow new
users to experiment with sample code, test algorithms and
write their own application. Now user's will have the
flexibility of writing their application in C making getting
started in DSP programming easier than ever before.
The TI optimizing C compilers translate ANSI-standard, C
language files into highly efficient TMS320 assembly language
source files, which are then input to the TMS320
assembler/linker. The TMS320C54x Optimizing C
Compiler/Assembler/Linker, was designed with three major
efficiency goals in mind:
- Produce compiled general-purpose C code that approaches
the performance of hand-coded assembly language.
- Provide a simple and accessible programming interface to
the C run-time environment so that critical DSP
algorithms, demanding extreme performance, can be
implemented in assembly language.
- Establish a comprehensive, easy-to-use tool set for the
development of high-performance DSP applications in C.
DSK-specific Code Composer Studio IDE
The DSK comes complete with DSK-specific Code Composer Studio
Debugger based on our full production Code Composer Studio
V2.0 IDE product. Code Composer Studio's integrated
development environment is similar to MS Visual C++. Thus
helping new users who are familiar with Visual C++ get started
with Code Composer Studio.
Code Composer Studio includes:
- Integrated Development Environment (IDE): debugger,
editor, visualization, profiler and project manager
- The editor is specifically tuned for writing C and DSP
assembly, this allows developers to work more efficiently
since they don?t have to switch applications to edit their
code.
- Multilevel debugging allows you debug both C and
Assembly language code.
- Probe Points
- File I/O
- Comprehensive data Visualization displays
- GEL C-based scripting language
Note: All Software tools bundled with the DSK are legally
restricted to use only with the C5402 DSK hardware. DSK
products are not elligible for software upgrades. |
|
|
