|
Device
definition |
ultra-compact UC1394a-1
ready-to-use, highly flexible 400 MBit/s 2-Port
IEEE1394a (FireWire®) MCM with IEEE1394a software stack
Various Board Support Package (BSP) options allow a wide
range of application solutions off the shelf |
|
CPU |
TMS320C5509 running at 144/200 MHz |
|
FPGA |
Xilinx Spartan 2 with 50 kGates |
|
Available RAM (type/size) |
SDRAM
8 Mbytes,
Boot Flash 512 kbytes |
Ultra-compact
Downward
Pin Compatible
Interfaces |
400
MBit/s IEEE1394a (FireWire®) serial bus, Port 0
8
or 16 Bit wide parallel Data Streaming Interface with 5
additional control lines, usable for isochronous raw
data streaming without software protocol overhead,
up to 32 MByte/s (BSP depending)
Multi-channel Buffered Serial Port 0 (McBSP)
Synchronous Serial Interface up to 50 Mbps @ 200 MHz,
alternativeley usable for raw data streaming etc
UART (without line drivers) for communication with PC
and for other application purposes, up to 115200 baud
5 digital FPGA I/O lines, usable for
application-specific signalling like digital camera
synchronisation etc |
|
Specific Additional UC1394a-1 Interfaces |
400
MBit/s IEEE1394a (FireWire®) serial bus, Port 1
11
Mbit/s USB 1.1 slave serial bus
Multi-channel Buffered Serial Port 1 and Port 2 (McBSP)
Synchronous Serial Interfaces up to 50 Mbps @ 200 MHz,
alternativeley usable for raw data streaming etc
8
or 16 Bit wide parallel Hostport Interface with
additional control lines, usable for fully bidirectional
data transfer up to 2 MByte/s in asynchronous 1394 mode
(BSP depending)
22 digital FPGA I/O lines, usable for
application-specific signals like digital camera
interface etc (BSP depending)
Direct DSP-connected XF I/O line
JTAG interface for onboard FPGA VHDL development
JTAG interface for onboard DSP software development
4
channel multiplexed 10 Bit Analog to Digital converter
I2C Bus
Real Time Clock (RTC) Power and Clock Input |
|
Dimensions |
30 mm
x 36 mm x 7 mm / 1.18 in x 1.41 in x 0.28 in |
|
Package |
116
Pin SMT Package |
|
CPU and Module Features |
256
Kbytes additional on-processor fast SRAM
2
timers
6 DMA channels
General purpose digital I/O line XF0
Onboard watchdog
Single 3.3V power supply
Standalone booting from Flash
Onboard power management system
Growing number of Board Support Packages (BSP) and EVM-Kits
enable various specific software and FPGA solutions |
Common
ultra-compact
Features |
Various, universal interfaces for many custom specific
applications
All important pins of the DSP and FPGA are wired to
external module connectors (BSP depending) |
