| Home | Download Service Center Jobs  | Add Favorites |




首頁 DSP應用 通訊聲音A/D-D/A Boards
ADA2-212
 


 
  • high-speed 2-channel IN / 2 channel OUT data I/O system

  • all analog front end parameters like amplification, offset and anti alias filter frequency are software programmable and on-board storable

  • no potentiometers or switches used

  • full parallel ADC sampling

  • extension from 4, 6, 8... to 14 I/O-channel parallel sampling possible when using several ADA2-212 boards

  • external hardware triggering possible

  • replacement of the 12 Bit ADC by a 14-bit ADC possible

Board Definition micro-line® ADA2-212
Analog inputs 2-channel analog inputs in a signal range of +10 mV and +10 V with offset voltages of up to ± 10 V
Input resistance 20 kOhm
Analog outputs 2-channel analog outputs in a signal range of +10 mV and +10 V with offset voltages of up to ± 10 V
Output resistance 20 Ohm
Anti-Alias-Filter SCF Butterworth low-pass filter of 8th order, 48 dB attenuation/octave

corner-frequency software adjustable between < 1 Hz and 50 kHz with 16 Bit resolution

corner-frequency additionally hardware adjustable up to 200 kHz by soldering bridges

SCF filter can be bypassed
Triggering continuous operation

software triggering

external hardware triggering
System Interface micro-line® bus
ADC AD7862, successive approximation 12 bit, parallel 2 x 250 ksps, low power
Or AD7863, successive approximation 14 bit, parallel 2 x 250 ksps, low power
DAC AD7247, 12 bit, 10 us settling time (2 x 100 kHz rectangle possible), low power
ADC FIFO buffering 512 samples FIFO, processor interrupt-triggering when first FIFO entry or when FIFO is half full
Dimensions 120 mm x 67 mm
Features several possibilities for hardware and software triggering

full parallel synchronous operation of several ADA2-212 in one system

E2PROM for resident storage of software programmed front-end settings and adjustments

external expansion possibilities via serial I2C-Bus

software support for TI DSPs
Applications general-purpose multi-channel analog measurement and controlling

zero-phase-error multi-channel analog measurement

external hardware-triggered multi-channel analog measurement