| Home | Download Service Center Jobs  | Add Favorites |




首頁 DSP應用 通訊聲音Embedded stand-alone DSP Controllers

E641X Embedded DSP Controllers :

E6414/E6415/E6416是極高效能的DSP平台,針對real-time 資料取得和DSP的工業標準3U form-factor,它提供靈活性的模組建造和多樣的“off-the-shelf” AD/DA/DIO和 I/O coprocessor  expansion daughter card 模組,使的E641x為嵌入式通訊、電話、多媒體、數位廣播和許多應用的理想的選擇

feature

  • ultra-high performance TMS320C6414/C6415/C6416 32-bit fixed-point DSP featuring: - Up to 8000 MIPS peak performance - 1Mbyte on-chip RAM, program and data caches - UTOPIA interface (TMS320C6415/C6416) - VCP/TCP hardware coprocessors (TMS320C6416) - dual-bus external I/O architecture

  • Up to 512Kx64 synchronous static RAM (SBSRAM)

  • Up to 16Mx64 synchronous DRAM (SDRAM)

  • Up to 1Mx8 plug-in FLASH/EPROM

  • 64-bit wide SBSRAM/SDRAM interface bus is isolated from FLASH/EPROM and on-board peripherals in order to enhance system performance

  • Dual-channel 10 Mbit/s universal receiver/transmitter (USART) with synchronous (HDLC/X.25, SDLC, MONO, BISYNC) and asynchronous protocols and 115 kBaud RS232 and 10 Mbit/s RS422 external interfaces

  • 12 Mbit/s USB device interface

  • 18-bit general purpose I/O

  • Host access to DSP on-chip HPI port (16/32-bit modes)

  • 50 MHz 8-bit UTOPIA level 2 slave interface (TORNADO-E6415/E6416) for ATM applications

  • Two watch-dog timers (one is programmable within 0.01..99.99 sec) and reset monitor

  • Real-time clock (RTC) with battery backup, 2100 year calendar, programmable alarm, and 50 bytes NvRAM

  • Programmable DSP external interrupt sources

  • DSP boot from either FLASH/EPROM, via HPI port, or DSP start-up without boot

  • Modular design with daughter-card modules (DCM)

  • Industry standard 3U form-factor